Contact Us

Tel:+86-510-88990983

Fax:+86-510-88990983

Mob:+8615861560932

E-mail:wxsxjinyan@163.com  

E-mail:lweisx@163.com  

Add:Houzhai Middle Road 156#, Hongshsan Town, New District, Wuxi, Jiangsu, China

Two Roll Mill For Plastic And Rubber Mixing Compounding Machine

Application: The machine is applicable for refining reclaimed rubber . Features: 1. The roll is made of chilled cast iron with vanadium and titanium alloys .The roll face is hard and anti-wear .Both the front roll and the back roll are plain .The internal cavity of the roll is processed to make...

Inquiry

  • Product Details

Application: 

Two rollers open rubber mixing mill main used in rubber product factory: Natural rubber refining, raw rubber and compound mixing. Rubber beating mixing and rubber tab letting.

This machine is double roller opening to be used for rubber or plastic mixing. It consists of seat, Frame, Rubber, Driving device, Lubricator and cooler, range adjusting device of roller. Safety brake. Motor and reducer, etc. The roller is made from safety cooled and hard cast iron, smooth surface is polished in term of different case. Saturated steam and cooling water can be inputted in the empty roller to adjust temperature of roller. Colloidal particles are drawn into the gap of the two rollers which make relative rotation in different velocity to mix rubber, into further rubber sheet.

Features:

1. The roll is made of chilled cast iron with vanadium and titanium alloys .The roll face is hard and anti-wear .Both the front roll and the back roll are plain .The internal cavity of the roll is processed to make temperature well proportioned on the roll surface .

2. For XKJ-480H,the back roll is circumferentially drilled for better cooling and front and back rolls are supported with roller bearings .

3. The machine is equipped with an overload protection device to prevent the major components from being damaged due to overloading .

4. The machine is also equipped with an emergency device .When an emergent accident happens ,just draw the safety pull-rod ,and the machine will stop immediately .It’s safe and reliable .

5. The machine is equipped with scraper and wind up unit ,which can take the reclaiming rubber off from the winding-up roller .

type

Roll dia.x Length

Front roll line   speed

(m/min)

Speed ratio

Capacity

(kg/h)

Motor power(KW)

Overall   dimension(LxWxH)(mm)

Weight(T)

XKJ400

400X500

24.5

1:1.7

200

45

3520x1710x1850

7.7

XKJ450

450X600

25

1:1.7

230

55

4600x1920x1870

11

XKJ480

610/480X800

25.6

1:1.815

250

75

5610x2450x2000

19

XKF480

610/480X800

25.6

1:1.55

250

75

5610x2450x2000

19


Rubber mixing mill

1. The rolls are made of chilled cast iron with spun casting.The roll face is hard and anti-wear.The internal cavity is processed to make temperature well proportioned on the roll surface.

2. The machine is equipped with an overload protection device to prevent the major components frombeing damaged due to overloading.

3. The machine is also equipped with an emergency device.When an emergent accident happens,just draw the pull rod,and the machine will stop immediately.it is safe and reliable

4. The transimission system adopts a ZQ planetary gear reducer,which has a compacted structure with higher transmission efficiency,lower noise and longer service life.

5. The base frame is a complete framework,which is convenient for installation.



  • Feedback